DPMSeal Paint – 5 Litres • Single pack system• Water based compounds that can be applied even to damp backgrounds • Non-toxic, non hazardous, solvent and plasticizer free• Good :bond to many substrates • Toughness. high flexibility, extensibility and good crack bridging properties • Low water vapour permeability • Alkali resistant, can be applied to alkaline surfaces • Resistant to silage acids • Non staining and stain blocking • Quick drying – typically touch dry in 1 hour DPMSeal Paint – 5 Litres – Application Application Floors: Under/above screeds to provide a damp proof membrane Basements: As part of a waterproofing system beneath ground level Walls: Can be used under render or plaster as a water barrier or vapour barrier Tiling: As secondary protection under tiles in wet areas, e.g. bathrooms. food processing areas, balconies, etc, Water Storage: The membranes perform well in tests even when continuously immersed in water, Silage Storage: The membrane protects concrete from silage attack. Application • The background surface should be smooth or have a light even texture. Any masonry should be flush pointed, and defects in existing surfaces made good. • The surface needs to be clean, sound and free of dust, loose material or surface water. The membrane should not be applied in wet conditions or where these conditions are likely to occur before the membrane has dried. • The membrane should not be applied when the temperature of the background or air temperature is below 7°C, • It is sometimes advantageous to pre-wet concrete or masonry backgrounds so that these are damp but free from any water glistening on the surface, to aid the wetting out of the background. • Because of the wide variety of background types and site conditions, it is always advisable to check adhesion to the back ground by testing on a sample area before starting any job. • The membrane may be applied by brush, roller or airless spray. If necessary, the compound can be diluted with up to 10% water. However, care should be taken to ensure that the correct dry coat thickness is applied. The thickness of the dried membrane per coat depends on the method of application. • For a single dry coat, thickness of more than 0_3mm, it is recommended that the membrane be applied by airless spray. If airless spray is used, single dry coat thicknesses of up to 1 mm can be obtained. (Note : a single coat of 0.6mm dry thickness or more will require a greater drying time than for an equivalent multi-coat application). Shop with confidence. Shop with us. PAM Ties & Builders Superstore have been providing goods to the building trade since 1991, and as you can imagine over that time we’ve built up quite the reputation for great value and the highest levels of customer satisfaction. Our websites are secure and easy to use, with tens of thousands of products available from the best names in the industry. Does that mean we never get it wrong? Of course not, but in those tiny number of cases, you’ll find we pull all of the stops out to put things right for you. We Provide: Low Price Fast, Free Delivery Over £75.00 Over 30,000 products Online All The Top Work Brands Money Back Guarantee Secure Shopping Guaranteed Providing Quality & Value Since 1991 Family Ran Business
